EN 
AR
BG
HR
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
ID
VI
TR
UR
MY
Alaabta
- Usha Tungsten Carbide oo leh Hole qaboojiye
- Ulaha Carbide adag
- Ulaha Carbide sibidhka
- Tungsten Carbide Rod
- Dhulka Tungsten Carbide Rod
- Tungsten Carbide Drill Bannaanka
- Tungsten Carbide Round Bar
- Tungsten Carbide Blade
- Qaybaha xidhashada Carbide
- Qaybaha Tungsten Carbide Custom
- Nolol Tungsten Carbide
- Alaabooyinka Tungsten
- Alaabta Molybdenum
- Dabeysha
- Qalabka Foomka Carbide Fin
YL10.2 Extrusion Sintered Tungsten Carbide Usha oo leh hal dalool 0.15mm
Meesha Asal ahaan: Zhuzhou, Hunan
Magaca Brand: Zhenfang
Shahaadada: ISO9001:2015
Darajada: ZF-R489
Tirada Dalabka Ugu Yar:10 pcs
Qiimaha: laga xaajoon karo
Waqtiga Bixinta: 3-10 maalmood
Shuruudaha Lacag-bixinta:L/C, D/A, D/P, T/T, Western Union
Awoodda Wax-soo-saarka:15tons/bishii
Description
faahfaahinta
| Waxyaabaha: | 100% bikrad tungsten carbide alaabta ceeriin |
| aragti, | OD3 * ID0.15 * 330mm cabbir kala duwan si loo doorto |
| Dulqaad madhan: | OD:+-0.3mm Aqoonsiga:+-0.05mm |
| Fasalka: | YL10.2 |
| Nooca: | carbide godan ul wareegsan |
| Dhulka: | maran ama shiidi |
| Nidaamka Waxsoosaarka: | Isku-darka awoodda-cadaadiska-HIP-ku-daridda-madhan- habaynta-waa la dhammeeyey |
| Performance | Adayg sare, xirashada/iska caabin daxalka, adayg wanaagsan, toosnaan wanaagsan |
| Codsiga: | wax soo saarka noocyada kala duwan ee mishiin koronto & electronic horusocod dhintay iyo feero.iyo dhoobada, mashiinka daabacaadda, caag, caag, warshadaha hargaha iyo mashiinada goynta. |
| Aan caadi ahayn ama dulqaad | laga beddeli karaa |
Usha carbide Tungsten oo leh hal dalool waa tungsten carbide ul wareegsan, kaas oo leh hal godad radial. Ulahaas waxaa inta badan loo isticmaalaa warshadaynta, laylisyada, qashinka iyo qalabyada kale, laakiin waxaan sidoo kale u isticmaalnaa diyaarinta madaxa qabow, dhinta shaabadeynta, qabow. kubbadda feerka, madaxyada dagaalka, qaybaha daawashada shaabadaynta, feedhista qolofka baytari, tuubooyinka cadayga iyo waxyaalo kale.
Laakiin ma dhaafi karno xaqiiqda ah in usha carbide tungsten oo leh hal dalool haddii loo isticmaalo samaynta mindida ama qaybo ka mid ah caaryada, waxay ku xiran yihiin usheeda dhexe, taas oo aan ku habboonayn gooyaha iyo caaryada. Dabcan, waxaan awoodnaa inaan bixino tayada Tungsten Carbide Single Hole Ulaha
Qaababkayada cabbirka guud:
| Baaxadda cabbirka (ODXIDXL mm) | Cabbirka faahfaahsan iyo dulqaadka madhan | ||
| OD (mm) | Aqoonsiga (mm) | L (mm) | |
| ODxIDx330 | 2-3 (0/+0.3) | 0.15/0.2/0.25/0.3/......1.1(+-0.05) | 30-340 |
| ODxIDx330 | 4-6 (0/+0.4) | 0.2/0.25/0.3/0.4..........4(+-0.05) | 30-340 |
| ODxIDx330 | 7-10 (0/+0.5) | 0.2/0.25/0.3/0.4...........6(+-0.05) | 30-340 |
| ODxIDx330 | 11-20 (0/+0.5) | 0.2/0.25/0.3/0.4........12(+-0.05) | 30-600 |
| ODxIDx330 | 22 | 6/8/10/12(+-0.2) | 100-600 |
| ODxIDx330 | 25 | 6/8/10/12(+-0.2) | 100-600 |
| Waxaan awoodnaa inaan kaa caawino inaad hagaajiso dhexroorka kala duwan iyo usha carbide ee dhererka | |||
Qalabka Jirka ah:
1) Adag ka weyn ama le'eg HRA 92.5;
2) TRS ka weyn ama la mid ah 3800 N/mm²;
3) Cufnaanta ka weyn ama la mid ah 14.2 g/cm³;
4) Porosity = A00 / B00 / C00;
5) Wax wasakhaysan oo alaabta kale;
6) Xor ka ah xaaladda wajiga ETA;
7) Cabbirka badarka lebbisan oo joogto ah. Ma jiro cabbir hadhuudh ah oo ka weyn kara inta la cayimay.
Qaar ka mid ah macluumaadka darajada tixraaca
| Fasalka | Cufnaanta g/cm3 | Hardness HRA (hv) | TRS (M Pa) | Waxqabadyada & codsiyada lagu taliyay |
| YL10.2 | 14.5 | 92.5 | 3800 | Xiro caabbinta iyo xoogga is barbar dhig ka sarreeya, oo ku habboon farsamaynta birta kabka, birta aan birta ahayn iyo walxaha aan birta ahayn. |
| YG6 | 14.9 | 89.5 | 2150 | Iska caabin Wear Wacan, oo loo isticmaalo alwaax adag, farsamaynta alwaax asalka ah, bar qaybta aluminiumka, usha naxaasta ah iyo birta shubka ah. |
| YG8 | 14.6 | 89 | 2320 | Ku habboon qalafsanaanta birta shubka ah iyo daawaha fudud iyo waliba shiididda birta shubka ah iyo birta daawaha hoose. |
| YG11 | 14.4 | 87.5 | 2260 | Hadhuudh dhexdhexaad ah, oo loogu talagalay qaybaha xidhashada iyo qalabka macdanta |
| YG15 | 14.1 | 86.5 | 2400 | Hadhuudh dhexdhexaad ah, agabka macdanta, madaxa qabow iyo feedhku way dhintaan |
| YS2T | 14.45 | 92.5 | 2800 | Carbiid Fine, caabbinta xirashada sare, xoogga foorarsiga sare, caabbinta sare ee isku xidhka, xoog kulaylka sare.Machining ee Alloys refractory, ahama iyo bir manganese sare iwm |
| YNi8 | 14.6 | 88.5 | 1710 | Fasalkan oo leh 8% nikkel binder, waxay leedahay iska caabin wanaagsan oo xirxiran & waxqabadka iska caabinta daxalka, gaar ahaan loo isticmaalo deegaanka cadaadiska sare, sidoo kale wuxuu u fiican yahay jarista daawaha titanium. |
Macluumaadka darajada carbide tugnsten ee kale ee tixraaca
| darajooyinka taxanaha YS | |||||
| Fasalka | heerka ISO | Cufnaanta g/cm3 | Hardness HRA (hv) | TRS (M Pa) | Waxqabadyada & codsiyada lagu taliyay |
| YS2T | K30 | 14.40-14.60 | 91.5 | 2200 | Waxaa iska leh daawaha hadhuudhka ultrafine, oo ku habboon roughturning-xawaaraha hooseeya, wax-shiidka, daawaha kulaylka u adkaysta iyo daawaha titanium ee gooyayaasha iyo tuubada, gooyaha wax-shiidka daabka ayaa ugu fiican. |
| YS8 | M05,K10 | 13.9 | 92.5 | 1720 | Ku habboon birta sare, birta aan fiicnayn, birta manganese sare iyo daawaha heerkulka sare, xaashida birta silikoon, iyo jarista dhammaan noocyada kala duwan ee alaabta daahan, sidoo kale ku habboon qallafsanaanta sare ee birta iyo muraayadaha iyo wixii la mid ah qaybaha shaqada ee mashiinnada qallafsan, dhamaystirka mashiinnada. |
| YS10 | M05,K10 | 14.30-14.50 | 91.5 | 2650 | Ku habboon birta sare ee nikkel, birta shubka birta qabow aan dhammaadka lahayn iyo bir cad oo qallafsan iyo farsamaynta dhamaystirka, sidoo kale loo isticmaalo farsamaynta qallafsan iyo dhamaystirka farsamaynta birta shubka. |
| YS25 | P20,P40 | 12.80-13.20 | 91.0 | 2000 | Ku habboon birta kaarboonka, birta shubka ah, birta manganese sare, birta xoogga badan iyo birta daawaha qallafsan rogid, wax-shiidid iyo qorsheyn. |
| YS30 | P25,P30 | 12.45 | 91 | 1800 | Alloy ultra particles ganaax, ku habboon quudinta weyn oo hufnaan sare shiidi dhammaan noocyada birta ah, gaar ahaan shiddada birta daawaha ah. |
| YS5 | 13.95-14.25 | 92 | 2000 | Waxay ka tirsan tahay daawaynta hadhuudhka aadka u fiican, oo ku habboon baabuur xawaare sare leh, shiidid, daawaha kulaylka u adkaysta iyo daawaha titanium ee gooyayaasha iyo tuubada, gooyaha wax-shiidka daabka ayaa ugu fiican | |
Goynta darajada fasalka birta
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Ku habboon jarista shaqada culus ee birta iyo birta tuurka ah iyo xawaaraha hoose iyo dhexdhexaadka ah iyo hawlgal cabbir heer-feed oo weyn oo hoos yimaada xaaladaha mashiinnada ee aan fiicnayn |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Ku haboon dhamaystirka nus-dhamaynta iyo dhamaystirka mashiinada birta iyo birta la shubay, iyadoo la isticmaalayo qadar quudin dhexdhexaad ah |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Ku haboon dhamaystirka nus-dhamaynta iyo dhamaystirka mashiinada birta iyo birta shubka ah iyo heerka quudinta dhexdhexaadka ah iyo xawaare sare oo goyn ah ayaa lagu talinayaa |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Ku habboon jarista shaqada culus ee birta iyo birta tuurka leh oo leh cabbir quudin weyn oo suurtagal ah iyo sidoo kale miidda wejiga. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Ku haboon dhamaystirka nus-dhamaynta iyo dhamaystirka birta aan-lahayn iyo kuwa caadiga ah |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Ku habboon dhammayn-dhammaynta iyo dhamaystirka birta aan-ka-baxsan iyo kuwa hooseeya, inta badan loo isticmaalo mashiinnada xarumaha taayirrada tareenada |
| YW3 | M10 | 12.85-13.10 | 92.0 | 1420 | Waxay ku habboon tahay dhamaystirka semi-dhammeynta iyo dhamaystirka birta aan caadiga ahayn iyo kuwa caadiga ah |
Faa'iidada warshadeena ee ul carbide tungsten oo leh dalool keli ah
1. Diirada saaraysa soo saarista alaabta carbide tungsten in ka badan 13 sano.
2. Soo-saare takhasus leh oo ku qalabaysan mashiinnada wax-soo-saarka ee horumarsan
3. Wax soo saar ka badan 15 tan/bishii si loo hubiyo sahayda badeecadaha waara
4. Awood buuxda oo lagu aqbalo dalabaadka OEM & ODM
5. Xakamaynta tayada adag iyo joogteynta tayada.
6. Kormeer adag oo loogu talagalay tayada alaabta ceeriin iyo alaabta la dhammeeyey
